our pick

Oster

Oster, Cryogen-X Blade for A5

W120266

$23.39 – $56.99

$36.99 – $56.99

Save up to $15.60

Earn 23 – 57 Ren's Reward Points
Free shipping on orders over $49*

The Oster A5 Blades will all fit on the Oster A5, and Andis model AG, AG2, AGC, AGC2, AGR, AGRC, MBG Clippers, but can also be used with other brands of detachable type clippers. CryogenX blades are made from a harder, denser metal that holds the sharp edge through use, and have innovative heat reducing technology and legendary sharp cutting performance to provide the user with the coolest and sharpest blade possible. These blades also have built in AgIon Antimicrobial Protection.

The Oster A5 #10 Blade leaves hair 1/16". Perfect for stomach, face, ears, pads, rectum & matted areas. Incorporating AgIon antimicrobial into the surface of the blade. Silver, a powerful metal ion is the active ingredient used to effectively control the growth of bacteria, mold & mildew - Improtant when clipping animals next to each other.

Blade Care Instructions

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.

Description

The Oster A5 Blades will all fit on the Oster A5, and Andis model AG, AG2, AGC, AGC2, AGR, AGRC, MBG Clippers, but can also be used with other brands of detachable type clippers. CryogenX blades are made from a harder, denser metal that holds the sharp edge through use, and have innovative heat reducing technology and legendary sharp cutting performance to provide the user with the coolest and sharpest blade possible. These blades also have built in AgIon Antimicrobial Protection.

The Oster A5 #10 Blade leaves hair 1/16". Perfect for stomach, face, ears, pads, rectum & matted areas. Incorporating AgIon antimicrobial into the surface of the blade. Silver, a powerful metal ion is the active ingredient used to effectively control the growth of bacteria, mold & mildew - Improtant when clipping animals next to each other.

Blade Care Instructions

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.

SKU:

Product Availability

Select product options to view inventory in stores near you.

Top of Page