Bathing Beauty

Bathing Beauty, Dog Washing System

100339

$1,149.99

Earn 1150 Ren's Reward Points

This product is currently unavailable for purchase.

The Bathing Beauty Dog Washing System is an amazing grooming product that will not only cut dog bathing time in half and save on hot water consumption, but will also get pet coats cleaner than 10 fingers can! Working similar to a dishwasher, the Bathing Beauty system first uses high pressure and high volume soapy water to flush of all the dead hair and dirt, then secondly flushes all the grime down the drain with a "rinse cycle". An added bonus that a dishwasher doesn't have though? Hydro-massage! Dogs love the almost therapeutic hydro-massage and will be more relaxed for their entire visit; in turn lessening groomer stress too!

Other benefits:

  • Eliminates the constant adjustment of water temperature experienced with conventional bathing
  • Reduces hot water consumption by 1/2 or more, saving you money on your hot water bill
  • Reduces shampoo usage. Not only this, but since the water has shampoo mixed in, the soapy water will soak down into the skin and start lifting dirt and grime without pre-wetting the coat
  • Faster rinsing cycles. Rinsing can be completed in half the normal time or less
  • Groom more dogs in less time, with the ability to charge for hydro-massage. Offering it as an additional service can earn more money per treated dog

Specifications on parts:

Pump

  • 110 volt AC, 1/6 HP. Current draw is 5 amps
  • Pump will self-prime and operate with a minimum amount of water in your tub, as low as 1/8" deep.
  • The Bathing Beauty has a supplemental all stainless steel screen hair filtering system that is "Self Slaking" for easy cleaning. No picking hair out of this filter!
  • Motor is "Thermally Protected" to assure a long operating life. If you accidentally leave the pump running with no water in the tub, the pump will shut off when the temperature sensor indicates the motor is getting hot. The motor will get very warm but only reach a  temperature that is well under that which can damage the motor.
  • Oil-encased to protect the motor through out its long life.
  • Heavy duty all aluminum housing gives you many years of bathing service and has enough weight to prevent the pump from being easily knocked over while in use. Plastic pumps simply can't "stand up" to this!
  • Rust Proof - The Bathing Beauty has a fiberglass reinforced plastic pump rotor and water flow chamber that can never corrode

Shock Shield and Air Switch Control Module

  • The Bathing Beauty Air Switch Control Module should be mounted on the wall within 8 feet of the tub but not directly above the tub. Attach the foot switch air tub to the control module for a safe, non-electrical air tube activated foot switch. This also gives you hands-free control of the system

Variable Hi-Flex Bathing Hose Assembly

  • The Bathing Beauty is the first bathing system with a pump that cannot be tipped over by the bathing hose. Be aware that the rigid hose used on other systems will pull over any bather. The Bathing Beauty has a high flex hose system that will not tip the bather. Also be aware that some competing bather systems attach their hose to the top of their pump which typically will require you to do something to keep the pump upright while in use. Not so with your Bathing Beauty's low elevation hose connection port. The low elevation hose port in combination with the high flex hose virtually makes tipping impossible
  • Comes with a specially-designed spray head that has a variable flow control valve so you can vary the bathing pressure form nearly 1/2 gallons per minute to a blasting high flow of approximately 10 gallons per minute of dirt, flake, and scab removal power. If you need the ultimated in "flushing power", remove the sprayer head and control valve for a major blasting power of 16 gallons per minute

Hand or Foot Air Switch

  • A heavy-duty air switch for a hands-free operation and non-electric switch activation that turns your Bathing Beauty off or on
  • The pneumatic (air) foot pedal contains an internal bellows which, when pressed, sends a pulse of air through a tube to our switch control module located away from the tub
  • Waterproof
  • Easy to to install on the wall, front of the tub or in the tub

Includes: Pump, Hose, Nozzle, Air Control Module and Foot Switch. Also includes Assembly Instructions, Directions, and Troubleshooting steps.

SKU: 100339

Description

The Bathing Beauty Dog Washing System is an amazing grooming product that will not only cut dog bathing time in half and save on hot water consumption, but will also get pet coats cleaner than 10 fingers can! Working similar to a dishwasher, the Bathing Beauty system first uses high pressure and high volume soapy water to flush of all the dead hair and dirt, then secondly flushes all the grime down the drain with a "rinse cycle". An added bonus that a dishwasher doesn't have though? Hydro-massage! Dogs love the almost therapeutic hydro-massage and will be more relaxed for their entire visit; in turn lessening groomer stress too!

Other benefits:

  • Eliminates the constant adjustment of water temperature experienced with conventional bathing
  • Reduces hot water consumption by 1/2 or more, saving you money on your hot water bill
  • Reduces shampoo usage. Not only this, but since the water has shampoo mixed in, the soapy water will soak down into the skin and start lifting dirt and grime without pre-wetting the coat
  • Faster rinsing cycles. Rinsing can be completed in half the normal time or less
  • Groom more dogs in less time, with the ability to charge for hydro-massage. Offering it as an additional service can earn more money per treated dog

Specifications on parts:

Pump

  • 110 volt AC, 1/6 HP. Current draw is 5 amps
  • Pump will self-prime and operate with a minimum amount of water in your tub, as low as 1/8" deep.
  • The Bathing Beauty has a supplemental all stainless steel screen hair filtering system that is "Self Slaking" for easy cleaning. No picking hair out of this filter!
  • Motor is "Thermally Protected" to assure a long operating life. If you accidentally leave the pump running with no water in the tub, the pump will shut off when the temperature sensor indicates the motor is getting hot. The motor will get very warm but only reach a  temperature that is well under that which can damage the motor.
  • Oil-encased to protect the motor through out its long life.
  • Heavy duty all aluminum housing gives you many years of bathing service and has enough weight to prevent the pump from being easily knocked over while in use. Plastic pumps simply can't "stand up" to this!
  • Rust Proof - The Bathing Beauty has a fiberglass reinforced plastic pump rotor and water flow chamber that can never corrode

Shock Shield and Air Switch Control Module

  • The Bathing Beauty Air Switch Control Module should be mounted on the wall within 8 feet of the tub but not directly above the tub. Attach the foot switch air tub to the control module for a safe, non-electrical air tube activated foot switch. This also gives you hands-free control of the system

Variable Hi-Flex Bathing Hose Assembly

  • The Bathing Beauty is the first bathing system with a pump that cannot be tipped over by the bathing hose. Be aware that the rigid hose used on other systems will pull over any bather. The Bathing Beauty has a high flex hose system that will not tip the bather. Also be aware that some competing bather systems attach their hose to the top of their pump which typically will require you to do something to keep the pump upright while in use. Not so with your Bathing Beauty's low elevation hose connection port. The low elevation hose port in combination with the high flex hose virtually makes tipping impossible
  • Comes with a specially-designed spray head that has a variable flow control valve so you can vary the bathing pressure form nearly 1/2 gallons per minute to a blasting high flow of approximately 10 gallons per minute of dirt, flake, and scab removal power. If you need the ultimated in "flushing power", remove the sprayer head and control valve for a major blasting power of 16 gallons per minute

Hand or Foot Air Switch

  • A heavy-duty air switch for a hands-free operation and non-electric switch activation that turns your Bathing Beauty off or on
  • The pneumatic (air) foot pedal contains an internal bellows which, when pressed, sends a pulse of air through a tube to our switch control module located away from the tub
  • Waterproof
  • Easy to to install on the wall, front of the tub or in the tub

Includes: Pump, Hose, Nozzle, Air Control Module and Foot Switch. Also includes Assembly Instructions, Directions, and Troubleshooting steps.

SKU: 100339

Product Availability

Top of Page